Short upper body

- Shape up in Cross 5 and Cross 6

Cross 6_hero banner_2250x600.jpg
/globalassets/0-international/wheelchairs-and-pressure-care-landing-page/body-shapes-cross-5-and-6-and-prio-3a/cross-5-and-6/page---short-upper-body/illustration_cross_accessories_body-shape_short.jpg?width=1280&Quality=90&rmode=max&scale=down

A user with a short upper body may need a shorter seat depth. It can be shortened from the front seat upholstery. Foot supports that can be set higher are an option.

Aim to adjust the back height below the shoulder blades, angle the seat to back and lumbar angles to provide a supportive position. If the user feels pressure towards the buttocks, caused by the back rails, Cell Foam Wedges (1) placed under the cover can reduce the pressure. Ensure that all Velcro straps below PSIS are set with a loose tension (2).

If the arm supports are too high, the attachments on the frame sides can be moved to the lower position (3).

green-line-2205x10.jpg

Etac-cellfoam-wedges-800x450.jpg

1. Cell Foam Wedges

These wedges are slightly wider but lower than the plush wedges.

They attach to the back cover with included self adhesive Velcro.
Back-strap-short-body-800x450.jpg

2. Tension Adjustable Back Straps

Contour the back support with the tension adjustable back straps, to support and follow the curve of the spine. The back straps below PSIS should always be set with a loose tension to provide the user space for the buttocks
arm-support-attachment-low-800x450.jpg

3. Low arm support attachment

The arm support has two options for positioning on the frame of Cross 6, this allows for accurate position and gives the option to close the gap when the 3A back is adjusted for posture or seat depth.

The attachments can be lowered 5 cm (2") on the frame.
Pressure_distributors_on_cross6_800x450.jpg

Pressure distributor

The pressure distributors are a useful accessory that can be added to create a feeling of a wider back and to add extra comfort where needed to avoid peak pressure.
green-line-2205x10.jpg
/globalassets/0-international/wheelchairs-and-pressure-care-landing-page/body-shapes-cross-5-and-6-and-prio-3a/accessories---body-shape/side-cushions--seatextender800x450.jpg?width=1280&Quality=90&rmode=max&scale=down

Example of accessory placement

Example of accessories placed on the back support. Here with the side cushion, along with the straight side stops, on both sides for optimum support, and the seat extender to create additional rear space.

See all body shapes and learn how to shape them up.

Go to body shapes