Broad shoulders

- Shape up in Cross 5 and Cross 6

Cross 6_hero banner_2250x600.jpg

Etac Cross 5 and Cross 6, can be set up for both a taller or a shorter users with different body shapes.

The majority of users will use the standard back support. Using the standard back support, the 3A-back support can be adjusted in height from 32 cm to 45 cm. And with the high back support you can get as high as 51 cm. 

Once the desired back height is adjusted and set, the fine tuning of the strap back can be done, and any accessories to support and shape up the posture can be added.

/globalassets/0-international/wheelchairs-and-pressure-care-landing-page/body-shapes-cross-5-and-6-and-prio-3a/cross-5-and-6/page---broad-shoulders/illustration_cross_accessories_body-shape-broad-shoulders.jpg?width=1280&Quality=90&rmode=max&scale=down

With broad shoulders, the general advice is to choose a seat width according to the hip width and adjust the back support for the broad chest.

To broaden the upper back support, attach the Width Extensions (1) and place the Plush Wedges (2) as far out as possible. If necessary, attach two pairs of Side Stops, with the widest pair on top and use the long Plush Wedges (2) or attach Cell foam Wedges (3) under the short wedges.

green-line-2205x10.jpg

Width-Extending-800x450.jpg

1. Width Extensions

The width extensions broaden the back by supporting the plush wedges further outwards. This is the wide model. There is also a side stop with half the width. They are adjustable in height, depth and angle.

To mount, just slide them into the back rails and fasten the screws.
soft_wedge_800x450.jpg

2. Plush wedges

There are two lengths to choose between, 15 cm (6") and 30 cm (12"). Usually the short model is sufficient.

Attach the wedges with the Velcro facing forward, towards the back cover. If the user feels the edge of the back cover, chose one size wider that will fully cover the widened wedges.
Etac-cellfoam-wedges-800x450.jpg

3. Cell Foam Wedges

These cell foam wedges are slightly wider but lower than the plush wedges.

Placed below the plush wedges they are an excellent complement providing support in the waist area. They attach to the back cover with included self adhesive Velcro.
Pressure_distributors_on_cross6_800x450.jpg

Pressure distributor

The pressure distributors are ideal to create a wider feeling for broad shoulders and they are a slim profile so do not push the shoulders forward.

Some users prefer this option, both options should be tried to determine the exact needs of the individual.
green-line-2205x10.jpg
/globalassets/0-international/wheelchairs-and-pressure-care-landing-page/body-shapes-cross-5-and-6-and-prio-3a/accessories---body-shape/width-extending-soft-plushwedges800x450.jpg?width=1280&Quality=90&rmode=max&scale=down

Example of accessory placement

Example of accessories placed on the back support. Here with the widening side stops and soft plush wedges to broaden the upper back support for extra support and comfort for the broad shoulders.

See all body shapes and learn how to shape them up.

Go to body shapes